Taking Your Old Hardware off and Putting it on New Shells
The time consuming task of removing your old hardware from your old royalite fairings and transferring it, after bead blasting and painting, onto the new fiberglass shells. At this time, it is usually advisable to put new AN hardware on since it only costs a few dollars per shell.Click on an image for a larger view
 New Shell Inside |
 New Shell Outside |
 Making the first holes |
 New Inside Bracket |
 The Bracket Test Installed |
 Bracket Look Inside |
 Rivet holes (19) Drilled |
 Rivets Installed |
 Dirty Attach Brackets |
 Clean Attach Brackets |
 Original Inner Plates |
 Clean Inner Plates |
 Axle Bracket for Axle Bolt |
 Axle Bracket Apart |
 Attach Bracket Apart |
 Axle Bracket Clean |
 Clean Bracket for Flex Bolts |
 Clean Brackets after Bead Blasting |
 All Parts ready for Painting |
 Parts Primed After Prep |
 All Parts Painted |
 Clecos holding the outer plate |
 Inside view of the outer plate |
 Axle plate installed |
 Axle hole drilled |
 New Hardware |
 Main Shell Primed |
 Rivnuts in place on Nose |
 Old nose brackets removed |
 Nose Brackets after Blasting |
 Front Fork Mockup |
 Using Mockup for Position |
 Aligning mockup for drilling |
 Front bracket in place for drilling |
 Bracket holes drilled |
 Brackets painted prior to install |
 Holes drilled in nose pant |
 Bracket sealed and bolted | To Be Continued |